Item # :
Availability : out of stockprice may change without notice
Notify me when the product is back in stock
*(On orders over $100 before taxes, Canada only, total order must weight less than 50 pounds)
Shank : 3/8"
Available with the most popular cutting diameter sizes and ideal for drill presses electric and cordless drills on all types of softwood these bits feature stagger tooth design for clean sharp holes with straight sides and flat bottoms.
Bits available with the following diameters: 1/4" - 1/2" - 3/4" - 1".
TIPS AND WARNINGS
-Making repeated shallow cuts and allowing the bit to cool for two or three seconds between passes will increase the life of your bit. Overheating caused by chip buildup or constant contact with the cutting surface will remove the temper from the bit’s cutting edges.
-You can also extend the life of your bits by not exceeding the maximum speed recommended for the type of wood. Applying excessive force to the bit while drilling will also cause overheating.
-Remove all the chips from the previous hole before boring a second or subsequent hole when mortising.
-Small Forstner bits can be used in a hand drill but the results are usually less than satisfactory. Using bits larger than 19mm (3/4”) in a hand drill can cause injury when the bit hangs on an imperfection in the wood.
-Always wear proper eye and hearing protection when working with power tools.
CMT 45° Wainscot/paneling bits
Cmt 690.131 Pair Knives Kss 40X4Mm
4 piece Forstner Bit Set - CMT 537.000.04
Cmt 690.561 Pair Knives Kss 50X4Mm
CMT 690.599 Blank knives and limiters (to be sharpened)
Please note that the final payment will be processed in Canadian Dollars.
Choose your currency