The Dust Deputy Bagger Cyclone Separator Kit by Oneida is a highly efficient and reliable solution for keeping your workshop clean and dust-free. This kit effectively separates and collects dust and debris before it reaches your vacuum, extending its lifespan and improving its performance. With its easy installation and durable construction, this cyclone separator kit is a must-have for any woodworking or DIY enthusiast.
Upgrade any make and model wet/dry vacuum into a two-stage dust control system with our patented cyclone separator. Removes over 99% of dust and debris from the airstream before it ever reaches the vacuum - virtually eliminating filter clogging and suction loss! Wall-mounted Bagger kit offers high waste capacity, visible fill level, and easy disposal. Kit includes anti-static cyclone separator, 3.9-gallon accumulation bin, wall mount, hardware, and five clear 3 mil bags.
Eliminate Suction Loss With Any Wet/Dry Vacuum Now 20% more efficient with Neutral Vane Technology, the Dust Deputy Bagger lets you work the way you want to. Injection molded from a translucent anti-static resin, the patented design of the Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum's filter, eliminating clogged filters and suction loss!
How It Works: The dust-laden air passes through the Dust Deputy Cyclone, which separates out 99% of the dust. The cleaned air passes into your shop vacuum, while the dust falls into an accumulation bin with an open grid bottom. A heavy (3 mil thick) plastic bag is held in place around the accumulation bin. When the vacuum is turned on, the bag is sucked up against the grid. When the vacuum is turned off, the bag drops back down and the collected dust falls from the accumulation bin into the bag. When the vacuum is turned on again, the previously bagged dust remains in the bag while newly captured dust collects in the accumulation bin. This action can be repeated until the bag is two-thirds full, at which point the bag should be removed and replaced. The Dust Deputy Bagger Kit Includes:
Anti-Static Dust Deputy Cyclone Separator Powder-Coated Steel Wall Mount Bracket 3.9-Gallon Accumulation Bin Steel Grid Five 3 Mil Thick 28" x 40" Bags Two Silicone Rubber Bands 2" x 6' Vacuum Connection Hose Two 90 Degree Hose Elbow Adapters 2.5" Adjustable Hose/Band Clamp Two Foam Gaskets Hardware
