The Leica DISTO S910 is the first LDM that captures multiple, accurate measurements in three dimensions from a single location, radically improving the efficiency of common measuring tasks.
Smart Base -- a biaxial pivot integrated with the circuit board -- is the key hardware innovation. Combined with a more powerful laser, a 360° tilt sensor, and new software --SmartBase enables the S910 to measure the distances and angles between multiple points.
SmartBase facilitates three new remote measurement functions:
Point to Point (P2P): Measure the tie distance between two points, even if you are hundreds of feet from your target. Shoot Point 1 then Point 2 and the S910 displays the distance between them. Widths, heights, diagonals, gaps, it doesn't matter: Just measure the start and end point and the distance is displayed.
Smart Area: Shoot the corners of any polygon to determine the area of walls, floors, even complex roof shapes.
Smart Angle: Shoot three points to measure any angle (including outside angles, which is a first).
Use a Tripod
For maximum accuracy the SmartBase requires a simple level check. This guarantees the electronic level of the S910 is within ± 0.1° of true level. For the highest measuring accuracy you will want to use a tripod for the majority of P2P, Smart Angle and Smart Area functions. The S910 includes a metal insert for a ¼” tripod thread, found at the bottom of the SmartBase (and a 5/8” adaptor is available).
Capture and Export Measurement Data
The S910 connects to compatible mobile apps with Bluetooth and exports DXF files over WiFi.
ISO 16331-1 certified measuring accuracy (favorable conditions)1.0mm / ± 0.04 in*
ISO 16331-1 certified measuring accuracy (unfavorable conditions)2.0mm / ± 0.08 in**
ISO 16331-1 certified range (favorable conditions)0.05m - 300m / 0.16 ft - 984 ft
ISO 16331-1 certified range (unfavorable conditions)0.05m - 150m / 0.16 ft - 492 ft
Smart Base vertical range-40° to 80°
Smart Base vertical sensor toleranceup to +/- 0.1°
Smart Base horizontal range360°
Smart Base horizontal toleranceup to +/- 0.1°
Tolerance P2P function? at distances (combination of sensors and distance measuring)approx. :?+/- 2 mm / 2 m+/- 5 mm / 5 m +/- 10 mm /10 m
Measuring units0.000 m, 0.0000 m, 0.00 m, 0.00 ft, 0'00" 1/32, 0.00 in, 0 in 1/32
Pointfinder with 4x zoomYes
File format.jpg / .dxf
MemoryLast 50 displays
Windows SoftwareDISTO Transfer with AutoCAD® plugin
Free AppiOS / Android
Data interfaceBluetooth® V4.0 Smart / WLAN / USB
Measurements per set of batteries~ 4000
Storage Temp. Range-25 to 60 °C -13 to 140 °F
Operating Temp. Range-10 to 50 °C 14 to 122 °F
Charging Temp. Range-10 to 40 °C 14 to 104 °F
Protection classIP 54 - splash water/ dust proof
Dimensions61 x 32 x 164 mm / 2.4 x 1.3 x 6.5 in
Weight with batteries8.5 oz